🟢 Calibrators Online · Avg. Delivery: 25–45 min
IMMO Off: 6 Cr (€48) · 1:1 OTP Clone: 8 Cr (€64)
IMMO Off & 1:1 ECU / TCU Cloning File Service (Tricore, Aurix, MPC)
ECU File Market provides professional software IMMO Off (immobiliser bypass) and 1:1 ECU/TCU Cloning adaptations for replacement donor control units. On modern Infineon Tricore (Bosch EDC17/MED17, Continental SID/Simos, Delphi DCM) and Aurix (MD1/MG1) processors, copying the raw EEPROM from the original ECU to a donor ECU fails due to hardware-locked OTP (One-Time Programmable) sectors and MCU unique ID encryption. Upload your Original (IntFlash + EEPROM) and Donor (IntFlash + EEPROM) reads—or just the Donor read for IMMO Off—and our engineers recalculate the CS, MAC, PIN, VIN, and immo blocks. Cost: 6 Credits for IMMO Off (€48 in 10-pack) and 8 Credits for 1:1 OTP ECU/TCU Cloning (€64 in 10-pack). Turnaround: 25–45 minutes.
🔍 Free Instant ECU Binary & % OEM Originality Scanner
.bin / .ori / .mpc / .fls file below to instantly check its Bosch/OEM SW number, % OEM originality, and exact per-ECU credit price before registering!Technical Compatibility Matrix (ECUs, Read Modes & Tools)
Every calibration is engineered directly on the original binary dump you read from the vehicle. Below is the hardware and protocol matrix for workshop tools:
| ECU / TCU Family | Processor & Security | Required Files to Upload | Bench / Boot Tools | Supported Service | Credit Cost |
|---|---|---|---|---|---|
| Bosch EDC17 / MED17 / MEVD17 (VAG, BMW, Mercedes, PSA, Ford, Kia/Hyundai) | Infineon Tricore TC1766 / TC1767 / TC1796 / TC1797 / TC1793 (OTP Protected) | IMMO Off: Donor IntFlash (+ EEPROM) 1:1 Clone: Orig + Donor (IntFlash + IntEEPROM in one .zip) | Autotuner, Flex, KESS3, DFOX, PCMFlash Mod. 71/53 | IMMO Off (plug & play) OR Full 1:1 Clone with OTP/CS/MAC/ISN recalculation | 4 Credits |
| Bosch MD1 & MG1 (MD1CS001, MD1CS003, MD1CS004, MD1CP002, MG1CS001–011) | Infineon Aurix TC277TP / TC298TP / TC299TP | Bench Full Backup: IntFlash + IntEEPROM | Autotuner, Flex, KESS3, DFOX, CMD | IMMO Off in Flash (on supported VAG/PSA/BMW SW) & Immo data transfer | 4 Credits |
| Bosch EDC15 / EDC16 / ME7 / MED9.1 | C167 / MPC555 / MPC562 | Flash + EEPROM (95320 / 95160 / 95080 / 24C04) | KESS3, Flex, Autotuner, MPPS, Programmer | IMMO Off & 1:1 Clone (including VAG MED9.1 crypted EEPROM) | 4 Credits |
| Continental SIMOS 8 / 10 / 12 / 18.1 / 18.10 & PCR2.1 | Tricore TC1796 / TC1797 / TC1791 (SHE / Boot Password) | Boot / Bench Full Read (IntFlash + EEPROM) of Original & Donor in .zip | Autotuner, Flex, KESS3, PCMFlash, CMD | 1:1 Immo Data Transfer / Clone & Simos 18 IMMO Off | 4 Credits |
| Continental SID208 / SID307 / SID309 / SID310 & Delphi DCM3.5 / DCM6.2 | Tricore TC1797 / TC1791 / TC277 | Bench / Boot Read (IntFlash + EEPROM) | Autotuner, Flex, KESS3, DFOX, IO-Terminal | IMMO Off / Virginize & Donor Adaptation | 4 Credits |
| Magneti Marelli 6F3 / 8F2 / 8F3 / 8DF / 9DF / IAW | MPC5565 / SPC564A | Bench Service Mode (Flash + EEPROM) | Autotuner, Flex, KESS3, DFOX, IO-Terminal | IMMO Off, Virgin (Auto-Coding) & 1:1 Clone | 4 Credits |
| VAG DSG / S-Tronic TCU (DQ200, DQ250, DQ381, DQ500, DL382, DL501) | Temic / Bosch / Continental TCU | Orig + Donor Bench Full Read (Micro/IntFlash + EEPROM) in .zip | Autotuner, Flex, KESS3, PCMFlash Mod. 58 | 1:1 Mechatronic TCU Clone (Immo + CP + Gear Calibration transfer) | 4 Credits |
🛠️ Workshop Protocol for IMMO Off & Donor ECU Cloning
- 1. How to Package Files for 1:1 ECU / TCU Cloning: Read both the Original (damaged) ECU and the Donor (replacement) ECU in Bench or Boot mode. Put
Orig_IntFlash,Orig_EEPROM,Donor_IntFlash, andDonor_EEPROMinto a single.zipor.rarfile and select Solutions Only → 1:1 ECU / TCU Clone (8 cr standalone / +5 cr w/ Stage). - 2. Why Raw EEPROM Copy Fails on Tricore (EDC17 / MED17 / Simos): Infineon Tricore processors encrypt the immobiliser data (CS, MAC, PIN, BMW ISN) using the processor’s unique hardware OTP ID. Our engineers decrypt the Original EEPROM using the Original IntFlash OTP key and re-encrypt it specifically for the Donor MCU’s OTP key.
- 3. When Original ECU Cannot Be Read (Total Water/Fire Damage): If the original ECU is completely dead and cannot be read on Bench or Boot, upload only the Donor ECU Bench Read (IntFlash + EEPROM) and select IMMO Off (6 cr standalone / +4 cr w/ Stage) so the donor ECU starts the engine immediately without immobiliser coding.
- 4. Matching Part Numbers for Donor ECUs: Always verify that the Bosch/Continental hardware number (e.g.
0281018xxxor0261S0xxxx) on the donor ECU matches or is hardware-compatible with the original unit.
💳 Transparent B2B Credit Pricing
Standalone IMMO Off is 6 Credits (€48 in the 10-credit workshop pack, or €24 with the 10+10 welcome bonus). Full 1:1 OTP ECU/TCU Cloning is 8 Credits (€64 in the 10-pack, or €32 with the welcome bonus).
- 1 Credit Single Top-up: €10 (€10.00 / credit)
- 10-Credit Workshop Pack: €80 (€8.00 / credit)
- 🎁 New Account Welcome Bonus: Buy your first 10 credits (€80) and get +10 extra credits FREE (20 credits total = €4.00 / credit effective cost!)
- 100-Credit Pro Volume Pack: €600 (€6.00 / credit)
Start Upload / Create Free Account →
Need a virgin / stock OEM file because the ECU on your bench was already modified? Search by Bosch/OEM SW number on our sister database ecuflashfiles.com or request it in your upload notes.
Frequently Asked Workshop Questions
What files do I need to upload for an IMMO Off job?
For IMMO Off on Bosch EDC17, MED17, MD1, MG1, or Continental/Delphi ECUs, upload the full Bench or Boot read (IntFlash + IntEEPROM in a .zip archive, or IntFlash if IMMO is stored in Flash). Select ‘Solutions Only’ and tick ‘IMMO OFF’ (6 Credits standalone, or +4 Credits with Stage 1).
What files do I need to upload for a 1:1 Donor ECU or TCU Clone?
Put both the Original (old) and Donor (replacement) Bench/Boot reads (IntFlash + IntEEPROM for each unit, clearly named Orig and Donor) into a single .zip archive. Upload the .zip file, select ‘Solutions Only’ and tick ‘1:1 ECU / TCU Clone’ (8 Credits standalone, or +5 Credits with Stage 1).
Will BMW ISN or VAG Component Protection / Immobiliser data transfer cleanly on EDC17/MED17?
Yes. By recalculating the Tricore EEPROM checksums and encryption blocks against the Donor processor’s OTP area, the cloned Donor ECU becomes a plug-and-play drop-in replacement with the original VIN, mileage, injector codes, and immobiliser keys intact.
Can you clone VAG DSG mechatronic units (DQ200, DQ250, DQ381, DQ500, DL501)?
Yes. Upload the Bench Micro/IntFlash + EEPROM reads from both the original and donor mechatronic units in a .zip archive, and we will transfer the immobiliser data and calibration.