🟢 Calibrators Online · Avg. Delivery: 25–45 min
Tier 4 · 13 Credits Stage 1 (€104) · Solutions from 7 Cr
Bosch MD1 & MG1 ECU File Service (MD1CS001, MD1CS003, MD1CS004, MD1CP002, MG1CS003, MG1CS011)
Bosch MD1 (Diesel) and MG1 (Petrol) are 4th-generation engine control units powered by Infineon Aurix 32-bit multicore microcontrollers (TC277TP, TC298TP, TC299TP). ECU File Market provides custom Stage 1/2 calibrations, AdBlue/SCR Off, DPF/OPF Off, EGR Off, Start/Stop Off, Vmax Off, Pop & Bang, and IMMO Off on your original Bench or Virtual Read dump. Note on 2020/06+ Bosch Bootloader Security: ECUs manufactured before June 2020 read directly on Bench with Autotuner, Flex, KESS3, DFOX, or PCMFlash (Mod. 92); post-06/2020 locked units require supported unlock/patch protocols. Cost: 13 Credits (Stage 1 Tier 4 = €104 in 10-pack) or 7–8 Credits for standalone solutions (e.g. MD1CS003 AdBlue Off = 8 Credits / €64).
🔍 Free Instant ECU Binary & % OEM Originality Scanner
.bin / .ori / .mpc / .fls file below to instantly check its Bosch/OEM SW number, % OEM originality, and exact per-ECU credit price before registering!Technical Compatibility Matrix (ECUs, Read Modes & Tools)
Every calibration is engineered directly on the original binary dump you read from the vehicle. Below is the hardware and protocol matrix for workshop tools:
| Bosch ECU Code | MCU | Main OEM Applications | Read / Write Protocol | Compatible Tools | Popular B2B Calibrations |
|---|---|---|---|---|---|
| Bosch MD1CS001 / MD1CP002 | Aurix TC298TP | BMW B47 2.0d / B57 3.0d (G20, G30, G01, G05) | Bench Direct (Pre-06/2020) / Unlock (Post-06/2020) | Autotuner, Flex, KESS3, DFOX, PCMFlash Mod. 92, bFlash | Stage 1/2 + Sport Display scaling, AdBlue/SCR Off, DPF Off, EGR Off, Vmax Off |
| Bosch MD1CS003 | Aurix TC298TP | PSA Peugeot / Citroen / Opel / Toyota 1.5 BlueHDi (DV5) | Bench Direct | Autotuner, Flex, KESS3, DFOX, FoxFlash | AdBlue/SCR Inducement Off (most requested!), Stage 1, DPF Off, EGR Off, DTC Off |
| Bosch MD1CS004 / MD1CP004 | Aurix TC298TP / TC299TP | VAG 2.0 TDI Evo (EA288 Evo) & 3.0 V6 TDI (EA897 Evo2) | Bench Direct (Pre-06/2020) / OBD VR | Autotuner, Flex, KESS3, DFOX, CMD, PCMFlash | Stage 1/2, AdBlue/SCR Off, DPF Off, EGR Off, Start/Stop Off, IMMO Off |
| Bosch MD1CS006 / MD1CS016 | Aurix TC298TP | Renault / Nissan / Dacia / Mercedes 1.5 Blue dCi, 1.7/2.0 Blue dCi, 2.3 dCi | Bench Direct | Autotuner, Flex, KESS3, DFOX | AdBlue/SCR + NOx Off, DPF Off, EGR Off, Stage 1 torque calibration |
| Bosch MG1CS001 / MG1CS002 / MG1CS008 | Aurix TC298TP | VAG 2.0 TSI (EA888 Gen3B/Gen4), 2.9/3.0 TFSI (EA839), 4.0 TFSI (EA825) | Bench / OBD VR | Autotuner, Flex, KESS3, PCMFlash, BitBox, bFlash | Stage 1/2, OPF/GPF Off, Pop & Bang (Overrun), Vmax Off, Cold Start Noise Off |
| Bosch MG1CS003 / MG1CS201 | Aurix TC298TP | BMW B38 1.5i, B48 2.0i, B58 3.0i, S58 (F/G-Series, Supra) | Bench (Pre-06/2020) / Unlock (Post-06/2020) | Autotuner, Flex, KESS3, DFOX, PCMFlash, bFlash | Stage 1/2, OPF/GPF Delete, Burbles/Pop & Bang in Sport, Vmax Off, Cat Off |
| Bosch MG1CS011 | Aurix TC277TP | VAG 1.0 TSI & 1.5 TSI Evo (EA211 Evo) | Bench / OBD VR | Autotuner, Flex, KESS3, PCMFlash | Stage 1, OPF/GPF Off, ACT (Cylinder On Demand) smooth calibration, Start/Stop Off |
🛠️ Workshop Protocol for Bosch MD1 & MG1 Calibrations
- 1. Identifying Pre-06/2020 vs Post-06/2020 Bootloader Lock: Connect your master tool (Autotuner, Flex, KESS3) on Bench pins first. If the ECU has a manufacturing date before June 2020 (or an older factory bootloader), Bench read takes ~90 seconds without opening the case.
- 2. PSA 1.5 BlueHDi (MD1CS003) AdBlue Reset Rule: Before writing an AdBlue/SCR Off file on Peugeot/Citroen/Opel 1.5 BlueHDi, always perform ‘Reinitialization of the DeNOx system / Reset starter lock’ in Diagbox on the original file.
- 3. Mercedes CPC_NG Torque Limiter Note: On 2019+ Mercedes-Benz models with Bosch MD1CP001 / MD1CS006 or MG1CP002, vehicle top speed and peak torque can also be capped by the external
CPC_NGpowertrain controller. - 4. Full Backup Safety: Always save both the
IntFlash(4 MB / 8 MB) andIntEEPROMfiles read on Bench.
💳 Transparent B2B Credit Pricing
Bosch MD1 & MG1 belong to Tier 4: Stage 1 is 13 Credits (€104 in 10-pack) and Stage 2 is 17 Credits (€136). Standalone solutions on MD1/MG1 (such as PSA 1.5 BlueHDi MD1CS003 AdBlue Off or BMW MG1CS003 OPF Off) cost 7–8 Credits (€56–€64 in 10-pack).
- 1 Credit Single Top-up: €10 (€10.00 / credit)
- 10-Credit Workshop Pack: €80 (€8.00 / credit)
- 🎁 New Account Welcome Bonus: Buy your first 10 credits (€80) and get +10 extra credits FREE (20 credits total = €4.00 / credit effective cost!)
- 100-Credit Pro Volume Pack: €600 (€6.00 / credit)
Start Upload / Create Free Account →
Need a virgin / stock OEM file because the ECU on your bench was already modified? Search by Bosch/OEM SW number on our sister database ecuflashfiles.com or request it in your upload notes.
Frequently Asked Workshop Questions
How much does a PSA 1.5 BlueHDi Bosch MD1CS003 AdBlue Off file cost?
If you need standalone AdBlue/SCR Off at stock power (Solutions Only), it costs 8 Credits (€64 in the 10-credit pack, or €32 effective with the 10+10 welcome bonus). If combined with Stage 1 (13 Credits), AdBlue Off adds only +4 Credits.
Do I need to open the Bosch MD1 or MG1 ECU casing to read it?
No. On all Bench-supported MD1 and MG1 units, reading and writing are performed directly through the external ECU connector pins using your tool’s Bench cable—the ECU lid remains sealed.
Can you remove OPF / GPF and add Pop & Bang on BMW B48/B58 (MG1CS003) and VAG 2.0 TSI (MG1CS001)?
Yes. We calibrate OPF/GPF differential pressure monitoring off without triggering torque intervention, and we can configure switchable overrun burbles (Pop & Bang) active only in Sport / Sport+ mode.
Can you do IMMO Off on Bosch MD1CS004 and MG1CS001 / MG1CS011?
Yes. Upload the full Bench read (IntFlash + IntEEPROM) and select Solutions Only → Immo OFF (4 Credits).