For off-road / motorsport use only where emissions-related or diagnostic changes are requested. Stage 1 is written on the original Delphi DCM3.5 read you send. Standard files are usually ready in less than one hour.

What AutoTuner announced
On 18 November 2026 AutoTuner announced that the Delphi DCM3.5 engine control unit is now officially supported via Boot Normal Read (NR) on the AutoTuner tool. According to AutoTuner, the protocol covers a large European fleet across Peugeot, Citroën, DS, Fiat and Toyota models powered by the 2.0 HDi, 2.0 HDi HYbrid4 and 2.0 JTDm diesel engines.
AutoTuner notes that the DCM3.5 was introduced around 2009 to help PSA’s DW10 2.0 litre turbodiesel family meet Euro 5. It is built around the 32-bit Freescale MPC5566 microcontroller and manages high-pressure common rail injection. The same unit also runs the diesel side of the HYbrid4 powertrain on the Peugeot 3008, Peugeot 508 and Citroën DS5.
- ECU: Delphi DCM3.5 (MCU MPC5566)
- Mode: Boot NR on the AutoTuner tool
- Readout: bootloader + software + calibration
- Read time about 5 minutes, write time about 7 minutes
- Checksum correction and backup creation
- Peugeot 308, 508, 3008, RCZ, Expert
- Citroën C4, C5, DS4, DS5, Jumpy, Jumper
- Fiat Scudo and Toyota ProAce
Always check the AutoTuner compatibility list for your exact vehicle and software before you connect.
Tuning files we can write for DCM3.5
If you already have a read from one of these diesel cars or vans, ECUFileMarket can write the file for you:
- Stage 1 on standard hardware
- DPF off, EGR off, DTC off and similar solutions, for off-road / motorsport use only
- Other requests on the same read, after we have checked the file
Availability is confirmed from the file you send and the software version. We do not quote a power figure before the read has been checked. If the job is unusual, message us before you flash.
What to send
Send the original read from your tool (a full Boot read is best), plus the software number and the vehicle details (model, engine and year). Prices and credits are shown publicly on our pricing page.
Source: AutoTuner news, 18 November 2026 (original announcement). Image: AutoTuner.