Workshop Stage 1 · custom file
Nissan qashqai 23710HX402 remap
Upload your fileSee Stage 1 estimate
Nissan qashqai power
Stock output is 115 HP / 190 Nm. A typical Stage 1 remap is 140 HP / 230 Nm. That is typically +25 HP and +40 Nm.
Stock vs Stage 1 (estimate)
- Stock HP
- Stock Nm
- Stage 1 HP
- Stage 1 Nm
Illustrative curves scaled to catalogued peaks — not a measured dyno of this car.
ECU IDs 010353745AA, 010373590AA and 010374733AA are listed for Qashqai 1.2 DIG-T 115 with EMS3155; sources: chiptuning-files-service.com and cartelematics.fr. Stage 1 140 HP / 230 Nm: mastertuning.it.
Order your engineered file
Three steps. You keep the original read. We return the Stage 1 file after payment.
Read the ECU
Take a full original dump with your tool. Keep that file. Do not send a Stage 1 read.
Upload it here
Upload the original dump with this SW/HW. We confirm the job and the Stage 1 estimate below.
Pay and receive
After payment you download the tuned file from your account. No public download link.
File identity
| Brand | Nissan |
|---|---|
| Model | Qashqai |
| ECU family | EMS3155 |
| Software (SW) | 23710HX402 |
| Hardware (HW) | 010374733AA |
Files built by an engineer on the customer's original read. Upload your original ECU/TCU read exclusively through our secure online upload portal. Tuned files are downloaded directly from your account in under one hour. WhatsApp (+41 77 912 95 41) is dedicated to pre-order technical support and consultation.
Solutions
Stage 1 first.
Stage 1
Custom remap after we read your original dump.
Offered on this remap
How the remap works
You upload the original Nissan qashqai dump on this page with the upload form. You download the tuned file from your account — not a public download.
Stage 1 estimate you can order
Catalogue estimate for this engine family. The tuner can set the exact HP/Nm on the list.
Typical gain +25 HP / +40 Nm. Not a measured dyno of your car.
Related
FAQ
What is software number 23710HX402?
23710HX402 is listed on EMS3155.
What type of ECU is EMS3155?
EMS3155 is the ECU family recorded for this file on the Nissan qashqai. The page only names vehicles that appear in the library — it does not guess other applications.
Do you remap the Nissan qashqai?
Yes. Upload the original Nissan qashqai ECU file. Solutions offered: Stage 1.
Where do I get the original file?
Read the original file from your ECU with your own tool and upload it on our upload page. Your tuned file is usually ready in under one hour. See how it works at ecufilemarket.com/start/.
I already use a remapping file portal. Can you take this job?
Yes. Upload this original dump with the upload form and choose the options you need (Stage 1, ST2, ECO, TCU). We write that job on your read. No dealer contract. Workshop file service: https://ecufilemarket.com/file-service/
How much power does Stage 1 add?
Stock output is 115 HP / 190 Nm. A typical Stage 1 remap is 140 HP / 230 Nm. That is typically +25 HP and +40 Nm. Source: Stage 1 catalogue. The graph is drawn from these peaks; it is not a measured dyno of this exact car.
Files are released only after payment and a permission check. Do not flash unverified dumps. Road use can be restricted or prohibited. Confirm the law where the vehicle is registered and used before you flash. Power figures and the dyno graph are catalogued peaks, not a measured run of your car. Tool lists are family-class catalogue entries, not a guarantee that every protocol is open on this vehicle.