Stage 1, Stage 2 and TCU files built by a calibration engineer on your original read. You see the price in credits before you pay.
Not sure? Find your car in the configurator. If your ECU is not listed, upload the read. We confirm the price before you pay.
| Tier | Typical ECUs | Stage 1 | Stage 2 |
|---|---|---|---|
| Tier 1 | EDC15, ME7, EDC16 PD, MED9 | 5 credits | 8 credits |
| Tier 2 | EDC16 CR, EDC17 standard, MED17, PCR2.1 | 8 credits | 11 credits |
| Tier 3 | EDC17 C5x–C8x, MED17.5.2x, MEVD17, Simos 12–18 | 10 credits | 13 credits |
| Tier 4 | Bosch MG1, MD1/MDG1, Simos 19 | 12 credits | 15 credits |
| TCU A | DQ200, DQ250, DQ500, DL501, ZF 6HP/8HP (older SW) | 6 credits | 8 credits |
| TCU B | DQ381, DQ400e, DL382, ZF 8HP Gen3/4 | 10 credits | 12 credits |
Credit packs: 1 credit = 10 EUR · 10 credits = 80 EUR (workshop pack) · 100 credits = 600 EUR (volume pack). Options: Pop & Bang 3, Vmax Off 1, DTC Off 2, Launch Control 5 credits. Checksum correction is a paid extra (3 credits).
Usually in under one hour during support hours. You download it from your account and get an email when it is ready.
Reads from common tools are supported (OBD, bench and boot), e.g. KESS3, K-TAG, Autotuner, Flex and PCMFlash. Send the full original read.
No. You create an account, buy credits by card and pay per job.
Yes. The credit price for your ECU tier and options is shown before you confirm the upload.